Problems and solutions of carbon fiber for strengthening

Carbon fiber fabric for structural strengthening can greatly improve the service life of buildings and reduce the cost of reinforcement. However, there will be common faults in construction, Horse Construction will share some solution to solve these problem.

2020-04-01 17:04:29

Design ideas of Prestressed CFRP laminate

The prestressed CFRP laminate system is different from the prestressed steel strand system. It is a bonded prestressed reinforcement mode. The anchorage only bears the prestressing effect when the tension is completed, and the stress load depends on the connection and transmission between the carbon fiber sheet glue and the target structure.

2020-04-01 17:06:08

Beam and column strengthening by CFRP and steel plate

Strengthening beams: enlarging reinforced concrete beam section, strengthening with carbon fiber fabricand sticking steel reinforcement. Column reinforcement: bonded steel reinforcement, carbon fiber cloth reinforcement.

2020-03-30 14:19:47

CFRP U type hoop for strengthening

U type hoop is an important component of reducing the peeling damage of carbon fiber cloth and concrete base material, ensuring the joint force of carbon fiber cloth and concrete base material, and is a part of the reinforcement body of CFRP fabric​.

2020-03-30 14:18:37

Stress analysis of structural strengthening by FRP wrap

In bridge reinforcement projects, fiber reinfroced polymer(FRP) wrap is mainly to improve the flexural capacity of the component, the shear bearing capacity and the axial compressive bearing capacity of the compression member, and to improve the stiffness and ductility of the component, the crack width of the reinforced concrete member can be controlled.

2020-03-30 14:17:03

Introduction of HM prestressed FRP plate strengthening system

Since the HM prestressed CFRP plate reinforcement system has been successfully developed in 2012, it has been successfully applied to a number of practical engineering reinforcement, and has achieved good reinforcement effect and long-term stability.

2020-03-30 13:59:46

Unidirectional carbon fiber fabric manufaturer

Shanghai Horse Construction Co., Ltd is the largest supplier of carbon fiber cloth in the CFRP industry base in China.

2020-03-30 13:54:56

What is unidirectional carbon fiber fabric?

The unidirectional carbon fiber fabric is in one direction (usually meridian) with a large amount of carbon fiber, with only a small amount of carbon fiber in the other direction and usually thin carbon fibers in the other direction, so that all the strength of the cloth is in the same direction.

2020-03-30 13:53:20

Why choose HM carbon fiber fabric for structural strengthening

HM carbon fiber fabric adopts imported raw silk, equipment is also purchased from German equipment, more precision, so the woven carbon fiber fabric is reliable, and can better guarantee the safety of the building.

2020-03-30 13:27:43

Fire resistance of carbon fiber reinforced concrete members

Through the analysis of the fire-resistant properties of various parts, it is found that the original reinforced concrete part and carbon fiber fabric have good fire resistance, while the refractory performance of the adhesive is poor.

2020-03-30 13:39:44
Back
Top
Close